ICE Raptor Carbon Frame and Forks [Size: Pro XXL]

Description

 

BMX frame ICE RAPTOR CARBON and Matching Forks

ICE RAPTOR Grey/Sand carbon BMX frame with IRC / PRO system

Note that our RAPTOR frame does not have V-Brake adapters, this frame is designed for disc braking only.

Frame kit sold with axle + IRC ''Ice Roller Coaster'' chain tensioners and Ø15mm rear through axle. This frame is manufactured using advanced technological processes from the highest quality carbon fibers of the Toray T700 + T800 type (T800 used for reinforcement). Few brands use the T800. The frame is molded in 2 parts which are then glued during manufacture.

The glue used is a high quality American glue called “9432”

Specific geometry: ''ARCH'' type rear seatstays designed to accommodate a Flatmount type brake caliper, which makes the whole thing very discreet and uncluttered. This system allows the mounting of a brake disc with a diameter of Ø 140mm.

Frame dropouts designed for mounting a Ø 15mm through axle (Ø 15mm axle delivered with the frame kit) or 10mm (adapter cups delivered with).

Technology and standards used: -

Our RAPTOR frame comes with our revolutionary IRC system (ICE Roller Coaster / integrated spring chain tension). This system will eliminate any tight spots in the chain, and above all will allow you to keep a precise rear wheel setback adjustment, in the sense that you will no longer have to disassemble the rear wheel to remove your chain. Save precious time when changing a crown between 2 rounds!

Everything is easy to assemble.

- Internal cable passage with carbon ''Pipeline'' type guidance for fluid guidance and considerable ease of assembly. Entrance to the sheath at the head tube, and exit at the internal level of the left seatstay for a direct connection to your brake caliper.

- Tapered head tube with integrated standard (SHIS: IS42/28.6-IS52/40) (Also accepts mounting of a fork with 1'1/8 pivot with a reduction fork cone)

- External bottom bracket 24 mm BSA type (Shinano Hollowtech II)

Laboratory-proven strength:

All our frames are subjected to a battery of laboratory tests, with requirements revised upwards compared to the usual data necessary for passing standards, to ensure that you have got your hands on a resistant product. (Frontal / rear impact tests, fatigue / torsion tests…)

15 mm of real adjustments for the rear wheel / Fine adjustment of the rear wheel:

Adjustment from 365 to 380mm in PRO size

Adjustment from 375 to 390mm in PRO XL size

Adjustment from 385 to 400mm in PRO XXL and PRO 3XXL sizes

Accepts a Ø 27.2 mm

Seatpost Ø 31.8mm seat clamp

Weight: 1,380 kg in PRO XXXL size

Available in sizes: PRO, PRO XL, PRO 2XL, PRO 3XL Color: Matte Gray / Sand decals

Matching Swat Taper forks